Caberg JUST SPEAK EVO User Manual

JUST SPEAK EVO
12
Multipoint Mobile Phones Pairing
You can simultaneously use two mobile phones which use the mobile
phone prole.
1. You can pair the rst mobile phone to the JUST SPEAK EVO by
following the simple procedures in “Mobile Phone Pairing”.
2. To pair the second mobile phone, press and hold the (–) Button for
5 seconds until the red LED is rapidly ashing and you hear multiple
beeps.
3. Within 2 seconds, press and hold the (+) Button for 1 second, then
the LED turns to blue ashing and the beeps turn to high tone double
beeps. You will hear a voice prompt saying “Multipoint pairing”.
4. Search for Bluetooth devices on your mobile phone. Select the
Caberg JSE in the list of the devices detected on the mobile phone.
5. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
6. The mobile phone conrms that pairing has completed and the JUST
SPEAK EVO is ready to use. You will hear a voice prompt from the
JUST SPEAK EVO saying “Your headset is paired”.
JUST SPEAK EVO
1st Mobile Phone 2nd Mobile Phone
Mobile Phone
Pairing
HFP
+
A2DP
HFP
Multipoint
Pairing
Multipoint Mobile Phones Pairing
Bluetooth Stereo Device Pairing
1. If the Bluetooth stereo device is integrated with the mobile phone
such as smartphones, you don’t need to pair the JUST SPEAK EVO
with it separately. When the JUST SPEAK EVO is paired with the
mobile phone, it is also paired as a stereo music device.

Caberg JUST SPEAK EVO Specifications

General

Brand	Caberg
Model	JUST SPEAK EVO
Category	Headsets
Language	English