12
CLEANING THE WASHABLE LINING
The comfort padding liner is treated with the SANITIZED® process
which provides both the anti-bacterial and anti-fungous action.
• Long-term protection against unpleasant odors
• Preserves the fabric and provides hygienic freshness and greater
comfort to the wearer
• Prevents the growth of bacteria which causes skin irritation
Wash it strictly by hand with neutral soap and water (max. 30°C)
Rinse it in cold water, do not wring it. Dry it at room temperature.
WARNINGS! Never clean the lining in the washing machine. Never
use petrol or other solvents to clean the lining.
5. HOW TO FIT THE WASHABLE LINING
5.1 Place the main liner padding inside the helmet.
5.2 Place the plastic frame in the front E and fix it to the seat atta-
ched to the EPS liner (Pic.8).
5.3 Place and fix the lateral fixing strips F between the EPS liner
and the shell (Pic.9). Follow the same step for the fixing strip
in the neck area. (Pic.10)
5.4 Attach the cheek pads by pressing the fixing studs placed in
the back.
6. WIND STOP
The wind stop device prevents cold air enterering from below.
6.1 INSTRUCTION TO MOUNT THE WIND STOP
Insert and press the fixing plastic frame of the wind stop bet-
ween the shell and the chin gard (Pic.11)
6.2 INSTRUCTION TO REMOVE THE WIND STOP
Remove the wind stop by rotating it indistinctively anticlockwise
or clockwise while pulling it gently (Pic.12)
ENG
imp.caberg 2 12 2004 15:21 Pagina 14
To Next Page
Loading...
Need help?
General
