Cactus RF60X - Page 24

24
Changing Parameters of all Active
Groups
9. You may also change settings for
all active groups at the same
time. To select all groups, press
and hold the button.
10. The selection indicators of all
groups will be on and the text
area will show <ALL GP>. The f irst
activated group in the sequence
of Master-A-B-C-D will be chosen
as the reference group.
11. Adjust the power and zoom levels
as you would for a single group.
The relative changes in both
settings in the reference group,
however, will apply to all active
groups, including the Master
 a s h. Fo r e x a m ple, b y a d ju sti n g
the power level of the reference
group from 1/4 to 1/8 (i.e., a
decrease of 1EV), the power levels
of all the active groups will
decrease by 1EV accordingly.
12. To exit from all group control,
press the button once.