54
15. Forming the Capacitor
W h e n y o u r a s h i s n e w or w h e n it h a s
not been used for a certain period of
time, the capacitor may have lost its
full potential to store electricity.
When this occurs, you can “form” the
capacitor as follows:
1. Switch on the RF60X in Local mode
with fresh batteries.
2. A d ju st t h e a s h t o f u l l p o w e r.
3. Allow the ready light to glow
15 seconds to 20 seconds f irst.
4. Fi r e th e a s h u si n g t h e
button.
5. Repeat steps 3-4. After a
sequence of 5 ashes, your
capacitor will be formed and work
as nor mal.
16. USB Connection
The USB port of the RF60X is designed
for f irmware updates.
To check the f irmware version, press
and hold and switch on the RF60X
at the same time.
To undergo a f ir mwa re update, switch
off the RF60X and remove the
batteries inside. Connect it to a
computer via Cactus mini-USB cable
MU-1 (optional) or a compatible
USB-to-mini-USB cable. The f irmware
update program will then recognize
To Next Page
Loading...