Cactus RF60X - Page 37

37
f ire a long-pulse HSS ash whenever
the shutter speed is faster than the
x-sy nc.
It is not necessary to conf igure
the RF60X for automatic HSS in Slave
mode. Pressing the button
to HSS Sympathy mode is for setting
up manual HSS only.
11.2.4 Manual HSS: HSS Sympathy Mode
To sync RF60X manually with a camera
shutter faster than x-sync speed, you
need a TTL ash with HSS / Auto FP
c a p a bi lit y.
1. M o u nt t h e T T L  a s h o n th e
c a m er a’s h ot s h o e. A s si g n th e
Master mode to one of the RF60X,
and Slave mode to the other RF60X
units.
2. Turn off the Automatic HSS
function in all the RF60X slave
units. Press , then press
until <AU HSS> (short form
for automatic HSS) is displayed.
Use the or button to select
<OFF>. Press again to
return to the main screen.
3. Switch the RF60X Master to
HSS Sympathy mode by pressing
twice. The center row of
the LCD display will show .
Meanwhile, all the RF60X Slave
units in activated groups will
turn to HSS Sympathy mode
automatically.