Cactus V6 II - Compatibility; Flash & Studio Strobes

BATTERY INDICATOR
GROUP
POWER LEVEL
POWER LEVEL INCREMENT
SELECTED FLASH PROFILE
WIRELESS SENSITIVITY
CHANNEL
DELAY TIMER
RELAY MODE INDICATOR
SLAVE MODE INDICATOR
7. Compatibility
The Cactus V6 II is both a wireless flash trigger and wireless remote control. While it
triggers both portable flashes and studio strobe lights, it also supports remote
control features with selected flash models.
7.1 Flash & Studio Strobes
7.1.1 Cactus RF60x / RF60
With the built-in Cactus V6 module, the Cactus RF60 series can be remotely
commanded and triggered by V6 II TX (see Section 16.1.1).
7.1.2 Flash Models with Digital TTL Mode:
z Canon e-TTL
z Fujifilm TTL
z Nikon i-TTL
z Olympus / Panasonic TTL
z Pentax TTL
7.1.3 Other Flash Models and Studio Strobes
The Cactus V6 II triggers all other flash models via the hot shoe, and studio strobes
with the PC sync male port, 3.5mm or 6.35mm port via optional cables (see Section
19). This includes high trigger voltage portable flash models, and all strobe models
with a trigger voltage of 300V or under. The Cactus V6 II does not provide remote
power control of these flashes and strobes.