CAD Audio U9 Mini-mic

To Next Page

U9 Mini-mic

(USB Mic/Headset)

Owner’s Manual

Introduction

The U9 is a USB audio device with

microphone and external headset support

that is designed specically for

ultra-portable computers (ePC).

It is designed to be used with Skype for

excellent call quality and convenience.

Product Specications

The U9 features the USB2.0 interface

(USB1.1 compatible) and plug-and-play

under Win 98/Win ME/Win 2000/Win XP/

Win Vista/Win 7 and MAC OSX operating

systems.

• This product connects to the USB

port and is fully functional after being

recognized by the computer.

• The microphone can be turned 90

degrees to left or right, when it is

plugged into the USB port.

• High sensitivity microphone for

crystal-clear voice recording at a

distance of 9 feet; e.g. video

conferencing.

• Built-in 3.5Ø stereo headset jack for

plugging in your favorite headphones.

User Instructions:

If the microphone or headset is not

functional even if the red indicator is

lit, please refer to the following trouble-

shooting steps:

Win 2000, Win XP

Go to Control Panel > Sounds and Audio

Devices Properties > Audio. Choose USB

PnP Sound Device for Default device under

Sound playback. Click on Apply and then OK.

Win Vista

Go to Control Panel > Sound > Playback,

select Speakers 2-USB PnP Sound Device,

click Set Default

Go to Recording, select Microphone

2-USB PnP Sound Device, click Set Default

and then OK.

CAD Audio

6573 Cochran Rd., Bldg. I Solon, OH 44139 U.S.A.

Tel: (440) 349-4900 Fax: (440) 248-4904

Sales: 800-762-9266 www.cadaudio.com

Need help?

Do you have a question about the CAD Audio U9 Mini-mic and is the answer not in the manual?

Summary

Product Information

Introduction

Overview of the U9 USB audio device and its purpose for ultra-portable computers and Skype.

Product Specifications

Details U9 features like USB 2.0 interface, plug-and-play, microphone rotation, sensitivity, and headset jack.

Device Setup and Configuration

Win 2000, Win XP Setup

Steps to set the USB PnP Sound Device as default playback device in Control Panel for Win 2000/XP.

Win Vista Setup

Instructions to select and set the USB PnP Sound Device as default playback and recording device in Control Panel for Win Vista.

Win 7 Setup

Steps to set the USB PnP Sound Device as default playback device in Control Panel for Win 7.

Switching Audio Output

Guide on how to change audio output back to the computer's onboard device.

Warranty and Support

Two-Year Limited Warranty

Details CAD Audio's warranty policy, exclusions, and limitations for the product.

Shipping Instructions

Procedure for returning the product for service, including obtaining an authorization number and shipping address.