Stereo output, Comms, Osc and Talkback module 8414 7-7
Revision S2005-6 S-Type
:14165 5LJKW#FKDQQHO#WR#PDWUL[#RXWSXW#7
Press this button to route the stereo master right channel signal to matrix send 4.
:14166 6XP#/.5#WR#PDWUL[#RXWSXW#6.7
Press this button to mono sum the stereo master. The mono sum is then available to
be routed to matrix sends 3 and/or 4.
:14167 /HIW#F KDQQHO#WR#PDWUL[#RXWSXW#6
Press this button to route the stereo master left channel signal to matrix send 3.
:14168 5LJKW#FKDQQHO#WR#PDWUL[#RXWSXW#5
Press this button to route the stereo master right channel signal to matrix send 2.
:14169 6XP#/.5#WR#PDWUL[#RXWSXW#4.5
Press this button to mono sum the stereo master. The mono sum is then available to
be routed to matrix sends 1 and/or 2.
:1416: /HIW#F KDQQHO#WR#PDWUL[#RXWSXW#4
Press this button to route the stereo master left channel signal to matrix send 1.
:1416; 2XWSXW#OHYHO#WR#PDWUL[#:.;
These rotary controls are used to adjust the output signal levels of matrix sends 7
and 8. Upper control for matrix send 7 and lower control for matrix send 8.
:1416< 2XWSXW#OHYHO#WR#PDWUL[#8.9
These rotary controls are used to adjust the output signal levels of matrix sends 5
and 6. Upper control for matrix send 5 and lower control for matrix send 6.
:14173 2XWSXW#OHYHO#WR#PDWUL[#6.7
These rotary controls are used to adjust the output signal levels of matrix sends 3
and 4. Upper control for matrix send 3 and lower control for matrix send 4.
:14174 2XWSXW#OHYHO#WR#PDWUL[#4.5
These rotary controls are used to adjust the output signal levels of matrix sends 1
and 2. Upper control for matrix send 1 and lower control for matrix send 2.
To Next Page
Loading...