What to do if my Cadco Convection Oven is completely switched off?
If your Cadco Convection Oven is completely switched off, there are a few things you can check: * Ensure the unit is plugged into the correct outlet type. * Reset the safety thermostat (see 2.3 above). If neither of these steps works, contact Cadco Service.
What to do if Cadco Convection Oven does not start after pressing START/STOP?
If your Cadco Convection Oven doesn't start after setting the time and pressing the START/STOP button, it might be due to the door not being completely shut. Make sure the door is completely shut.
Why is my Cadco XAFT-111 not producing humidity?
If your Cadco Convection Oven (dynamic models only) isn't producing humidity, consider the following: * Open the water inlet. * Ensure the oven is correctly connected to the water supply/tank. * Fill the tank with water. * Clean the filter.
How to fix water leaking from Cadco XAFT-111 door?
If water is escaping from the door gasket of your Cadco Convection Oven when the door is shut, it could be due to several reasons: * The gasket might be dirty: Clean the gasket with a damp cloth. * The gasket might be damaged: Replace the gasket. * The door handle mechanism might be loose: Get the handle mechanism repaired or replaced.
General| Model | XAFT-111 |
|---|---|
| Type | Convection Oven |
| Thermostat | Yes |
| Fan | Yes |
| Material | Stainless steel |
| Electrical | 120V, 60Hz |
| Timer | 60 minutes |
| Power Supply | 120V, 60Hz |
| Power Consumption | 1500W |
To Next Page
