To Next PageTo Next Page
Need help?Do you have a question about the CADDX NX-416E and is the answer not in the manual?
Overview of the NX-E Series Receiver Modules and their compatibility with Caddx control panels.
General recommendations for installing receiver modules, including antenna placement and environmental considerations.
Step-by-step instructions for mounting the circuit board edge guide standoff and securing the module.
Procedures for wiring the module, setting DIP switches, and powering up the control panel.
Detailed steps and guidelines for programming receiver module settings and zone configurations.
Instructions for programming transmitter and partition settings using recorded information.
Procedures to remove transmitter identification from the module's memory.
Guidance on verifying correct programming and operation of wireless transmitters.
Common issues and solutions for wireless transmitter installation and operation.
General instructions for installing the NX-450 and NX-451 Door/Window Sensors.
Description of the Door/Window Sensors and their basic functionality.
Recommendations for sensor placement, environmental considerations, and mounting techniques.
List of required tools and materials for installing the sensors.
Step-by-step guide for mounting the sensor base and magnet.
Information on connecting external switches to the Door/Window Sensor.
Procedure for installing external switches and connecting them to the sensor.
Guidelines for testing sensor operation and radio signal integrity.
Solutions for common problems encountered during sensor installation and operation.
Steps to move and retest a sensor for optimal communication.
Procedure for finding a new, acceptable location for the sensor.
Steps for replacing a malfunctioning sensor with a new one.
Technical details including power source, dimensions, and operating temperature.
Regulatory compliance information, including FCC rules.
Comprehensive guide for installing the 60-686-43-EUR Door/Window Sensor.
Summary of the sensor's functionality, including signal transmission and power source.
List of essential tools required for the installation process.
General recommendations for mounting and environmental placement of the sensor.
Detailed steps for mounting the sensor and magnet, and connecting external switches.
Information on using specific spacers for sensor mounting.
Details on using magnet spacers for optimal sensor performance.
Instructions for wiring external switches to the sensor.
List of materials required for connecting external switches.
Reference to programming instructions for the NX-Series Receiver Modules.
Procedures for testing the sensor's signal integrity and panel response.
Guidance on resolving issues with sensor activation and communication.
Steps to find and test an alternative location for the sensor.
Instructions for replacing a faulty sensor.
Technical specifications including frequency, operating range, and dimensions.
Regulatory compliance statement regarding FCC rules.
Technical details of the KeyChain Touchpad, including power and frequency.
Regulatory compliance information and user modification warnings.
General instructions for using the KeyChain Touchpad.
Overview of the KeyChain Touchpad's functions for system operations.
Reference to programming instructions for NX-Series Receiver Modules.
Procedures for testing the functionality of the touchpad buttons.
Recommendations for optimal placement and mounting of motion sensors.
Description of the NX-480 motion sensor and its features.
Specific instructions for using the animal alley lens for pet immunity.
Step-by-step instructions for mounting the motion sensor in various configurations.
Procedure for changing the sensor's detection lens.
Guide for adjusting the motion sensor's sensitivity levels.
Process for testing the sensor's coverage area and functionality.
How to test sensor performance under various environmental conditions.
Instructions for using masking labels to block specific detection zones.
Reference to programming instructions for NX-Series Receiver Modules.
Recommendations for periodic verification of sensor range and coverage.
Steps for correctly replacing the sensor's batteries.
Procedures for final verification of radio signal integrity and panel response.
Solutions for common issues with motion sensor activation and detection.
Steps to find and test an alternative location for the motion sensor.
Instructions for replacing a faulty motion sensor.
Technical specifications including frequency, power, and dimensions.
Regulatory compliance and warnings related to the motion sensor.
General