To Next PageTo Next Page
Need help?Do you have a question about the CADDX NX-448E and is the answer not in the manual?
Describes the receiver modules, their compatibility with control panels, and their function.
Provides essential rules and recommendations for installing receiver modules safely and effectively.
Details the step-by-step process for physically mounting the receiver module within the control panel cabinet.
Covers electrical connections, DIP switch settings, and powering up the receiver module.
Explains how to enter programming mode and set receiver options and zone banks.
Guides on assigning zones, enabling sensors, and setting partition keyfob options.
Details how to adjust normal, fire, and short supervision window timings for transmitters.
Covers procedures for deleting transmitters and testing their functionality.
Addresses common issues encountered during installation and operation of wireless transmitters.
Lists technical details including compatibility, frequency, power, and dimensions.
Includes FCC compliance statements, CE marking, and other regulatory information.
Describes the NX-450 and NX-451 sensors and their basic function on doors, windows, or objects.
Provides essential rules for installing door/window sensors, including placement and environmental considerations.
Details the steps for mounting the sensor base and magnet, including alignment.
Instructions for connecting external wired switches to the door/window sensor.
Verifies the correct programming and radio signal integrity of the installed sensors.
Guidance for resolving issues if the sensor does not respond correctly when activated.
Lists technical details such as power source, dimensions, battery life, and operating temperature.
Contains FCC compliance statements and warnings regarding modifications.
Describes the door/window sensor's function, battery power, and supervisory signal.
Lists the necessary tools and optional materials required for sensor installation.
Provides rules for mounting the sensor, including distance from the panel and environmental factors.
Step-by-step instructions for mounting the sensor, magnet, and handling the circuit board.
Details on connecting external switches to the sensor, including wiring configurations.
Directs users to refer to the NX-Series Receiver Modules Installation Instructions for programming.
Covers testing sensor operation, relocating, replacing, and resolving common issues.
Lists technical specifications for the sensor, including frequency, compatibility, and dimensions.
Contains FCC compliance rules regarding interference and operation.
Describes the keychain touchpad's convenient functions for system operations like arming and disarming.
Refers users to the NX-Series Receiver Modules Installation Instructions for programming details.
Explains how to test the touchpad's buttons for arming, disarming, and panic functions.
Lists technical specifications including power source, frequency, dimensions, and operating temperature.
Contains FCC compliance rules and warnings regarding modifications.
Provides rules for installing motion sensors, focusing on placement and environmental factors.
Describes the PIR motion sensor, its detection method, and features like coverage and tamper protection.
Details the options for mounting the sensor, including flush, incline, and corner positions.
Instructions on how to remove and replace the standard or animal alley lens.
Explains how to adjust the sensor's sensitivity from standard to high for different environments.
Procedures for walk-testing and environment testing to verify sensor coverage and performance.
Guides on using masking labels to block specific detection zones or areas.
Directs users to the NX-Series Receiver Modules Installation Instructions for programming.
Covers periodic verification of sensor range and instructions for replacing batteries.
Final verification steps and guidance for resolving sensor issues.
Lists technical specifications like frequency, power source, battery life, and dimensions.
Contains FCC compliance rules and warnings regarding modifications.
General