Need help?Do you have a question about the Cadence CEQ-783 and is the answer not in the manual?
Explains the function and benefits of paragraphic equalization in car audio systems.
Lists the center frequencies (50Hz, 200Hz, 1KHz, 20KHz) for the equalizer bands.
Details the boost/cut range (-18dB to +18dB) and frequency response (30Hz-250Hz).
Covers signal to noise ratio (>95dB), max output level (9 Volts RMS), and THD (<0.05%).
Provides the physical dimensions of the unit: 7" x 1" x 4.25" (WxHxD).
Details recommended installation locations (in-dash, under-dash, console) for the CEQ-783 unit.
Explains how to connect power, ground, and remote turn-on wires using the molex plug.
Recommends using high-quality shielded RCA cables to prevent electrical noise.
Outlines initial checks to perform after installation to ensure proper operation.
Describes the function of front panel controls like Volume, Fader, Gain, and EQ frequency.
Details the MP3 player, USB/SD card support, and source selection buttons.
Identifies and explains the purpose of rear panel connections like power, ground, and outputs.
Step-by-step guide for adjusting amplifier gains, volume, and input levels for optimal sound.
Advice on setting amplifier gains to minimum initially and raising them as needed to avoid noise.
General| Brand | Cadence |
|---|---|
| Model | CEQ-783 |
| Category | Stereo Equalizer |
| Language | English |
To Next Page