3-2
Comfort Controls
This section tells you how to make your air system work
for you.
Climate Control Panel
Your vehicle is equipped with an electronic climate
control system. This system can automatically adjust
and control temperature, fan speed, air delivery mode,
air conditioning operation and air intake. You can use
the AUTO (automatic) setting or override the automatic
operation by manually adjusting the controls. If your
vehicle is equipped with the climate control
personalization feature, you will be able to recall your
preferred climate control settings using your remote
keyless entry transmitter. See “Climate Control
Personalization” in the Index.
Manual Operation
To turn the system on, press the knob located on the left
side of the climate control panel.
∧
MODE
∨
: Press MODE to deliver air through the
floor, instrument panel or windshield outlets. The
system will stay in the selected mode until MODE is
pressed again. The current mode is displayed on the
climate control panel when MODE is pressed. Press the
up or down arrow to cycle through the following modes:
D
(Upper): This setting directs the airflow
through the instrument panel outlets.
D
(Bi-Level): This setting directs airflow into
your vehicle in two ways. Cooler air is directed to
the upper portion of your body through the four
instrument panel outlets while warmer air is directed
to the floor.
D
(Floor/Defrost): This setting directs airflow to
the floor outlets and toward the windshield.
D
(Floor): This setting directs airflow through
the floor outlets. Some air is diverted to the
windshield to minimize fogging.
To Next Page
Loading...
Need help?
General
