• Move the front of the horizontal control up or down to
raise or lower the front part of the cushion.
• Move the rear of the horizontal control up or down to
raise or lower the rear part of the cushion.
• Lift up or push down on the center of the horizontal
control to move the seat cushion up or down.
• To move the seat forward or rearward, slide the
horizontal control forward or rearward.
The vertical control is used for reclining your seatback.
See Reclining Seatbacks on page 1-5 for more
information.
Power Lumbar
Your vehicle may have
this feature. The driver’s
and passenger’s seatback
lumbar support can be
adjusted by moving
the control located on
the outboard side of the
seat cushions.
To increase or decrease support, hold the control
forward or rearward. Keep in mind that as your seating
position changes, as it may during long trips, so
should the position of your lumbar support. Adjust the
seat as needed.
1-3
To Next Page
Loading...
Need help?
General
