10-4 Vehicle Care
Bonnet
To open the bonnet:
1. Pull the bonnet release handle
inside the vehicle. It is on the
lower left side of the instrument
panel.
2. Go to the front of the vehicle and
move the secondary bonnet
release lever toward the right
side of the vehicle.
3. Lift the bonnet.
To close the bonnet:
Before closing the bonnet, be sure
all filler caps are on properly. Then,
bring the bonnet from full open to
within 152 mm (6 in) of the closed
position. Pause, then push the front
centre of the bonnet with a swift,
firm motion to fully close the bonnet.
To Next Page
Loading...
