Seats and Restraints 3-7
2. Press and release SET. A beep
will sound.
3. Immediately press and hold "1"
until two beeps sound.
4. Repeat Steps 1-3 for a second
driver using "2."
To store positions to the
B (Exit)
button and Easy Exit features:
1. Adjust the driver seat and
outside mirrors to the desired
positions for getting out of the
vehicle.
2. Press and release SET. A beep
will sound.
3. Immediately press and hold
B
until two beeps sound.
Manually Recalling Memory
Positions
If the vehicle is OFF or not in
P (Park), press and hold "1," "2,"
or
B to manually recall the
previously stored memory positions.
Releasing "1," "2," or
B before the
stored positions are reached stops
the recall.
If the vehicle is ON and in P (Park),
press and release "1," "2," or
B to
manually recall the previously
stored memory positions. Placing
the ignition in OFF before the stored
positions are reached stops the
recall.
Automatically Recalling Memory
Positions (Auto Memory Recall)
The Auto (Automatic) Memory
Recall feature automatically recalls
the current driver's previously stored
"1" or "2" position when entering the
vehicle.
Depending upon the Auto Memory
Recall feature enabled in the vehicle
personalisation menu, memory "1"
or "2" positions are recalled in the
following ways:
To activate the recall when the
ignition is off and On - Driver Door
Open is selected in the vehicle
personalisation menu:
.
On vehicles with RKE, press K
on the RKE transmitter and open
the door.
.
On vehicles with Keyless
Access, press the lock/unlock
button on the outside driver door
handle and open the driver door.
The RKE transmitter must be
present for the recall to activate.
.
If the driver door is already
open, press
K on the RKE
transmitter to activate the recall.
To Next Page
Loading...
