Cadillac BLS - Page 73

73Instruments and controls
Setting values
1 Select the function using the steering
wheel buttons, or .
• SPD W (preset to 55 mph (90 km/h))
• Dist (preset to 100 miles/100 km if not
previously set)
• Speed Ø
2 Hold the SET button depressed until a
chime sounds.
3 Press the steering wheel buttons,
or to change the value (the value can
be reset with button CLR).
4 End by pressing the SET button.
Using DIST as a trip meter
1Select Dist using the steering wheel
buttons, or .
2 Press and hold the CLR button for
approx. 1 second.
An arrow will now appear on the right-hand
side of the display, indicating that the trip
meter is running.
Resetting a single function
1 Select the function to be reset using the
steering wheel buttons, or .
•FuelØ (the value is reset
to 10l/100 km)
• Speed Ø
• Trip (Dist used as trip meter)
2 Press and hold the CLR button for
approx. 1 second.
The selected function will now be reset.
Resetting the trip computer
1 Press and hold the CLR button (approx.
3 seconds) until audible confirmation is
given.
The following functions will be reset:
• Fuel Ø (the value is reset
to 10l/100 km)
• Speed Ø
• D.T.E. (the value is reset to the distance
that can be reached with the amount
of remaining fuel if fuel consumption is
10 l/100 km; lower fuel consumption
increases this distance)
• Trip (Dist used as trip meter)
460_OM_MY09.book Page 73 Wednesday, April 2, 2008 10:32 AM