90Instruments and controls
Functions
Manual settings are not affected by the system’s automation.
Pressing AUTO will cancel all manual settings.
The selected temperature is always maintained automatically.
Temperature, air distribution, fan speed and recircula-
tion will be controlled automatically.
Pressing AUTO once will cancel all previous manual
selections.
The ACC system is in AUTO mode when the engine is
started.
A/C compressor OFF.
No cooling of inlet air. Temperature, air distribution and
fan speed still under automatic control.
Turn the fan control anticlockwise until "OFF" lights up.
ACC system OFF.
Fan OFF.
A/C compressor OFF.
Air distribution selections locked in current settings.
Recirculation can be selected manually.
Front seat heating
3.
Pressing the AUTO button will put the system into auto-
matic mode.
Reactivation by turning the fan control clockwise one
click causes the system to resume any manual selec-
tions.
The rear window and door mirror heating is controlled
manually.
Deactivate the heating as soon as the rear window is
free of ice and misting so as not to unnecessarily load
the battery. Heating will deactivate automatically after
a set time period.
Turn the fan control to increase fan speed.
If fan speed 0 is selected, the A/C compressor will be
disengaged and the indicator on the AC OFF button will
illuminate.
Recirculation is controlled manually to optimize cooling
although it can also be switched on and off manually.
Recirculation does not appreciably change the air
quality, but it can be beneficial to activate it manually to
prevent unpleasant smells from entering the cabin.
460_OM_MY09.book Page 90 Wednesday, April 2, 2008 10:32 AM
To Next Page
Loading...
