Cadillac CT4 Owner Manual (GMNA-Localizing-U.S./Canada-16500442) -
2023 - CRC - 5/4/22
Vehicle Care 441
1. Remove the tire sealant
canister (4) and
compressor from its
storage location. See
Storing the Tire Sealant
and Compressor Kit 0 446.
2. Remove the air only hose
(10) and the power plug (9)
from the bottom of the
compressor.
3. Place the compressor on
the ground near the
flat tire.
4. Attach the air only hose
(10) to the sealant canister
inlet valve (1) by turning it
clockwise until tight.
5. Slide the base of the tire
sealant canister (3) into
the slot on the top of the
compressor (6) to hold it
upright.
Make sure the tire valve
stem is positioned close to
the ground so the hose will
reach it.
6. Remove the valve stem
cap from the flat tire by
turning it
counterclockwise.
7. Attach the sealant/air
hose (2) to the tire valve
stem by turning it
clockwise until tight.
8. Plug the power plug (9)
into the accessory power
outlet in the vehicle.
Unplug all items from other
accessory power outlets.
See Power Outlets 0 101.
To Next Page
Loading...
