1-8 Keys, Doors, and Windows
With Remote Start Shown,
Without Similar
Q (Lock): Press once to lock the
doors. When the doors are locked,
the fuel door will also be locked.
When locking the vehicle the turn
signal lamps may flash and the horn
may sound. To program the vehicle
so the turn signal indicators do not
flash and the horn does not sound
when pressing
Q on the keyless
access transmitter, see “Remote
Door Lock Feedback” under Vehicle
Personalization on page 4‑51.
K (Unlock): Press once to unlock
only the driver door. The turn signal
indicators flash twice.
Press
K twice within five seconds
to unlock all the doors. The interior
lamps may come on.
To program the vehicle so the turn
signal indicators do not flash and
the fog lamps and reverse lamps
remain on steady for about
20 seconds when the keyless
access transmitter is used to unlock
the vehicle, see “Remote Door
Unlock Feedback” under Vehicle
Personalization on page 4‑51.
For vehicles with the memory
feature, press
K on the keyless
access transmitter to program and
recall the memory settings. See
Memory Seats on page 2‑9 for more
information.
/ (Remote Start): Press to
operate the remote start feature.
See Remote Vehicle Start on
page 1‑12 for additional information.
V (Remote Trunk Release):
Press and hold for about
one second to unlock the trunk.
The automatic transmission
must be in P (Park) or the manual
transmission must be in Neutral
with the parking brake set.
L (Vehicle Locator/Panic
Alarm): Press and release to
locate the vehicle. The horn
sounds three times and the turn
signal lamps flash three times.
Press and hold
L for
three seconds to sound the
panic alarm. The horn sounds
and the turn signal lamps flash for
30 seconds. Press and release
L
again to stop the alarm.
To Next Page
Loading...
