Front Turn Signal, Sidemarker,
Parking and Cornering Lamps
To replace one of these bulbs, do the following:
1. Locate the lamps which are located beside the
headlamp assembly. See Steps 1 through 6
under Headlamps on page 5-51 to remove the
headlamp assembly.
2. Access the bulbs by lifting off the bulb socket
dust cover.
3. Press the tab down and turn the housing socket
clockwise to unlock the socket from the lamp
housing.
4. Remove the bulb socket by turning it
counterclockwise.
5. Pull out the old bulb.
6. Install a new bulb into the socket.
7. Reverse the steps to reinstall the lamp assembly.
5-55
To Next Page
Loading...
