To
replace the drain grate do the following:
Side
Rail
Channels
1.
Line up the clips on the vehicle with the
slots
in the
grate.
2. When you are sure that the clips are aligned with
the
slots, push the grate down firmly.
The grate should clip into place. Don’t force the grate
if
it won’t clip into place; realign the clips with the holes
and
try
again.
The side rail channels are located on top of
both
sides
of the cargo area. You may want
to
flush them
out
with clean water
if
you
notice any debris collecting inside
of them.
When loading cargo into the cargo area, be careful not
to
damage the rails.
2-67
To Next Page