If
you believe your headlamps need horizontal (H)
(lefvright) adjustment, follow the horizontal aiming
procedure. If you believe your headlamps need only
vertical
(V)
(up/down) adjustment, follow only the vertical
aiming procedure.
Adjustment screws can be turned with an E8 Torx@
socket or
TI5
Torx@ screwdriver.
Headlamp Horizontal Aiming
Turn the horizontal aiming screw
(A)
until the
indicator
(B)
is lined up with zero.
Once the horizontal aim is adjusted, then adjust the
vertical aim.
5-55
To Next Page
Loading...
