Display
Air Conditioning
If you press the
MODE
button
to
select an air delivery
mode, the display will change
to
show you the selected
air delivery mode. After ten seconds, the display will
change to show the driver temperature setting and the
selected mode.
If
you press the up or down arrows on the fan switch,
the display will change to show the selected fan speed.
After ten seconds, the display will change
to
show
the driver temperature setting and the selected mode.
Whenever you press AUTO, the display will change
to
show the following:
the current driver’s set temperature and an arrow
for five seconds,
the current passenger’s set temperature setting and
an arrow for five seconds and
the automatic air delivery mode and fan speed.
If the driver’s and passenger’s temperature settings are
the same when AUTO is pressed, the temperature
setting and both arrows will be displayed for five
seconds along with the automatic air delivery mode and
fan speed. After the five second update, the display
will change
to
show the temperature setting, both arrows
and AUTO.
e
(Air Conditioning):
Press this button
to
turn the air
conditioning compressor on and
off.
%k
(Air
Conditioning
Off):
When you turn the air
conditioning
off,
this symbol will appear on the display.
When air conditioning is selected or in AUTO mode,
the system will run the air conditioning automatically
to
cool and dehumidify the air entering the vehicle. If
you select
A/C
off while in front defrost or defog, the
A/C
off
symbol will flash to let you know this is not
allowed. This is
to
prevent fogging.
On hot days, open the windows long enough
to let hot
inside air escape. This reduces the time it takes for
your vehicle
to
cool down. Then keep your windows
closed for the air conditioner
to
work its best.
On cool, but sunny days while using manual operation
of the automatic system, use bi-level
to
deliver warm
air
to
the floor and cooler air
to
the instrument
panel outlets. To warm or cool the air delivered, turn the
temperature knob
to
the desired setting.
In AUTO mode the system will
cool
and dehumidify the
air inside the vehicle. Also while in AUTO mode, the
system will maximize its performance by using
recirculation as necessary.
3-27
To Next Page