Battery Replacement
Under normal use, the battery
in
your remote keyless
entry transmitter should last about two years.
You can tell the battery is weak
if
the transmitter won’t
work at the normal range in any location. If you have
to get close to your vehicle before the transmitter works,
it’s probably time to change the battery.
To replace the battery in the keyless entry transmitter,
do the following:
Nofice:
When replacing the battery, use care not to
touch any of the circuitry. Static from your body
transferred to these surfaces may damage the
transmitter.
1.
Insert a thin object, such as a coin, in the slot
between the covers
of the transmitter housing
near the key ring hole. Remove the bottom
by twisting the coin.
three-volt CR2032 or equivalent battery, positive
(+)
side up.
2. Remove and replace the battery with a
3.
Align the covers and snap them together.
4.
Check the operation
of
the transmitter.
2-7
To Next Page
Loading...
