Setting the Tone
TREBLE: Touch the plus (+) or minus (−) sign to
increase or decrease the treble. If a station is weak or
noisy, decrease the treble.
MID (Midrange): Touch the plus (+) or minus (−) sign
to increase or decrease the midrange.
BASS: Touch the plus (+) or minus (−) sign to increase
or decrease the bass.
Adjusting the Speakers
L/R (Left/Right) (Balance): Touch and hold the L or R
screen buttons, to adjust the balance between the
left and the right speakers. Touch the center where the
two lines meet, to center the balance.
Front/Rear (Fade): Touch and hold the Front or Rear
screen buttons, to adjust the fade between the front
and the rear speakers. Touch the center where the two
lines meet, to center the fade.
Digital Signal Processing (DSP)
The Bose
®
Cabin Surround
®
Sound System has Digital
Signal Processing (DSP). DSP is used to provide a
choice of four different listening experiences. DSP can
be used while listening to the audio system. The
type of DSP selected is displayed on the status line.
Select from the following DSP settings:
Normal: Select to adjust the audio to be in normal
mode. This provides the best sound quality or all seating
positions.
Surround: When listening to stereo sources, select to
activate the Bose
®
Centerpoint
®
signal processing
circuitry to create a surround sound listening experience.
Centerpoint
®
signal processing delivers five independent
audio channels from conventional stereo recordings.
This is not available for AM or FM.
The navigation system can play digital recordings such
as Dolby Digital (AC-3), DTS, or MLP (DVD-A).
Driver: When listening to stereo sources, select to
adjust the audio to give the driver the best possible
sound quality.
Rear: Select to adjust the audio to give the rear seat
occupants the best possible sound quality.
3-6
To Next Page
Loading...
