3. When the screen displays “Insert Disc
(number)”, insert the disc partway into the slot,
label side up. The system will pull it in and start
playing. The system will display the type of disc
inserted, DVD - Video,
B Audio for CD/DTS,
MP3 for MP3 CDs, or DVD - Audio.
To load multiple discs, do the following:
1. Press and hold the load hard key.
2. When the screen displays “Insert Disc
(number)”, load the disc partway into the slot,
label side up. The system will pull it in.
3. Once a CD is loaded, the system will display
“Insert Disc (number)” again. Load the next
disc. Repeat this procedure for each disc. The
player takes up to six disc(s), do not try to
load more than six. The system will not display
the disc types when loading all, until the
discs have been read by the system.
Once all discs have been inserted, the system
will start playing the last loaded disc.
If no CD or DVD is loaded in the CD/DVD
changer and you press the SRCE hard key a
“No disc loaded” error message will be
displayed.
Select the Cancel screen button, when
available, to stop the loading process and to
start playing the last loaded disc.
Z (Eject): To eject a disc, do the following:
1. Press the eject hard key.
2. Select the slot number, 1–6, to eject the disc.
3. The system will display “Ejecting Disc” and
then eject the disc.
If a selection is not made, the system will
eject the disc from the current slot. If the disc
is not removed from the slot, the system
will pull it back in after 10 seconds and start
playing it.
To eject all discs at once, press and hold the eject
hard key. The system will display the disc
number being ejected.
105
To Next Page
Loading...
