Using the “Re‐dial” Command
1. Press and hold b g for two seconds.
2. After the tone, say “Re‐dial.”
Once connected, the person called will be heard
through the audio speakers.
Receiving a Call
When an incoming call is received, the audio
system mutes and a ring tone is heard in the vehicle.
Press
b g and begin speaking to answer the call.
Call Waiting
Call waiting must be supported on the cell phone and
enabled by the wireless service carrier.
.
Press b g to answer an incoming call when
another call is active. The original call is placed
on hold.
.
Press b g again to return to the original call.
.
To ignore the incoming call, no action is required.
Three‐Way Calling
Three‐way calling must be supported on the cell phone
and enabled by the wireless service carrier.
1. While on a call, press
b g.
2. Say “Three‐way call.”
3. Use the dial or call command to dial the number of
the third party to be called.
4. Once the call is connected, press
b g to link all
callers together.
Ending a Call
1. Press b g.
2. Say “End Call.”
Muting a Call
During a call, all sounds from inside the vehicle can be
muted so that the person on the other end of the call
cannot hear them.
.
To mute a call, press b g, and then say
“Mute call.”
.
To cancel mute, press b g, and then say
“Un‐mute call.”
4-118
To Next Page
Loading...
