Adjustment of the Shifter - 6-speed
• • Adjust / check the middle position of the shift lever, it should be inclined
approx. 3-5º to the left, this is position 3/4 (middle position)
The side Unibal connecting rod
should not be adjusted!!
• • Adjust the spring stop:
the gear lever should be
inclined slightly to the
left.
If the spring stop is setted
correctly, the lateral play
is the same to the right
and left side when the
gear 3 or 4 is engaged
• This is the basic
setting of the
shifter and must be
carried out
correctly!!
To Next Page
Loading...