10. Pressure/Weight conversion table
If you do not have a pressure gauge kit then you may use a bathroom scale to
give you an idea of the effort required to generate a certain pressure.
Places your Robot on top of a scale and tare it if possible. The Robot weighs
approx. 3kg (6.6lbs) so if you cannot tare your scale you must bear in mind
that you need to deduct 3kg (6.6lbs) from readings.
Pull a shot as usual and read the amount of kg/lbs. So for example you pulled
a shot and the tared scale displayed 15kg/33lbs. We look at the table and it is
roughly 6 bars.
Please note this is a guide and the figures are approximations.
To Next Page
Loading...