1. First use or a er a long period of disuse
1.1 Fill the water tank with fresh, still water.
1.2 Plug in the machine and turn it on.
1.3 The buttons and alarm indicator light will
blink simultaneously.
1.4 Place an ample container under the
dispensing spout.
1.5 Press one of the co ee buttons. Wait for
the machine to complete the priming cycle
and ll with water.
1.6 At the end of this operation, empty out
the water from the used capsule bin.
2. Turning on the machine
2.1 Fill the water tank with fresh, still water.
2.2 Turn the machine on.
2.3 The buttons will blink simultaneously to
indicate that the machine is warming up.
When the buttons remain steadily lit, the
appliance is ready for operation.
3. General operating indications
1ST DESCALING SIGNAL
3.1 When the descaling indicator light blinks
ORANGE and the appliance emits 3 beeps, it is
advisable to carry out a descaling cycle.
1.4
1.61.5
2.2
2.3
2.1
1.1 1.2
1.3
3.1
GB
To Next Page