1. Use ↑ or ↓ to select the AUDIT OVERVIEW submenu and press ← to access it.2. TOTAL TURNOVER is
shown in display, this counter will show the total turnover for the lifetime of this machine.
3. Use ↑ or ↓ to step to COLLECTED MONEY, this shows any active credit in the machine
4. Use ↑ or ↓ to step to TOKENS, this shows how many free vend tokens that have been used.
5. Press STOP to go back one level within the PAYMENT menu.
RFID
If the machine is using RFID this menu may be available.
Select the RFID menu by using ↑ or ↓ and press ← to access it.
• RFID MODE: TIMEOUT - This mode means that once you have unlocked the machine with your tag, after
X seconds the machine will automatically lock itself again.
• RFID MODE: TOGGLE - This mode means that you have to unlock the machine with your tag and when
you are finished, you have to lock the machine with your tag again.
• RFID MODE: DISABLED -
Setting the RFID mode
1. Use ↑ or ↓ to select the RFID submenu and press ← to access it.
The status is flashing on the display.
2. Use ↑ or ↓ to select TIMEOUT, TOGGLE or DISABLED.
3. Press ← to confirm the change.
4. Press STOP to go back one level within the PAYMENT menu.
WATER FILTER
If the machine is using water filter this menu may be available.
Select the WATER FILTER menu by using ↑ or ↓ and press ← to access it.The machine have a litre counter
when using a water filter to remind the user when to change it. When the filter is replaced this counter
should also be reset.
When acessing the WATER FILTER menu it will show CHANGE FILTER?: YES flashing in the display.
Simply press ← to confirm and reset the counter. Machine will then jump back to main menu.
To Next Page
Loading...