Need help?Do you have a question about the CAI 700 Series and is the answer not in the manual?
General| Brand | CAI |
|---|---|
| Model | 700 Series |
| Category | Measuring Instruments |
| Language | English |
Provides an overview of the CAI 700M HFID analyzer's function and design.
Details safety alerts, cautions, warnings, and hazard symbols.
Guides through zero and span calibration for THC or CH4 modes.
Explains timed zero and span calibration sequences.
Defines parameters for successful manual and automated calibrations.
Allows customization of analyzer ranges and full-scale concentrations.
Enables or disables automatic range switching based on concentrations.
Displays analyzer temperatures, pressures, EPC voltages, and flows.
Provides diagnostic view of detector raw volts and calculated concentrations.
Configures averaging times, mode times, and CH4 correction factors.
Manages analog and digital output assignments and configurations.
Sets up network parameters for analyzer communication.
Allows viewing or changing upper and lower alarm tolerances.
Optimizes linearity by inputting coefficients for each range.
Defines operator access levels for analyzer functions.
Details hardware capabilities of main and auxiliary connectors.
Describes commands and data structure for AK protocol communication.
Explains Modbus function codes for device communication.
Provides register and coil number mappings for Modbus commands.
To Next Page
