3. Unboxing and installing
The delivery from CAKE includes:
• 1x Preassembled CAKE Makka
• 1x Battery charger
• 1x Toolset
• 2x Side-view mirrors
• 2x Reflectors
• 2x Key for steering lock and battery lock
• 2x Grey key card for activating the vehicle
• 1x White master key card: required to reset a new grey key card if one is
lost.
Note! Do not keep the white master key with the vehicle. Keep it
safe.
1. Unbox according to How to unbox the Makka on ridecake.com/en/
makka-manuals-and-videos.
2. Check that the handlebar, wheels, and saddle are properly fastened.
3. Charge the battery, see ”6.2 Charging the battery”. During transport, the
battery is discharged.
4. Mount the side-view mirrors.
a) Place the washer between the handlebar and the nut.
b) Tighten the nut with the toolset wrench.
5. Mount the license plate in accordance with applicable law.
6. Mandatory in the US, voluntary in the rest of the world: Stick the
reflectors to the side of the rear fender.
7. Recycle packaging in accordance with local laws and regulations.
To Next Page
Loading...
