EasyManuals Logo

Calculated Industries 8525 User Manual

Calculated Industries 8525
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
POCKET REFERENCE GUIDE - 1
o - On/Clear Key
Turns power on. Pressing once
clears the display. Pressing twice
clears all temporary values.
Ç o - Off
Turns all power off, clearing all non-
permanent registers.
r - Recall
Recalls stored values.
+ – x ÷ =
Arithmetic operation keys.
0 - 9 and
Digits used for keying in numbers.
Dimensional Unit Keys
y - Yards Key
Enters or converts to Yards.
f - Feet Key
Enters or converts to Feet as whole
or decimal numbers. Also used with
the i and / keys for entering
Feet-Inch-Fraction values (e.g., 6
f 9 i 1 / 2 ). Repeated
presses during conversions toggle
between Feet-Inch-Fractions and
Decimal Feet.
KEY DEFINITIONS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Calculated Industries 8525 and is the answer not in the manual?

Calculated Industries 8525 Specifications

General IconGeneral
BrandCalculated Industries
Model8525
CategoryCalculator
LanguageEnglish

Related product manuals