Need help?Do you have a question about the Calculated Industries 4054 and is the answer not in the manual?
General| Brand | Calculated Industries |
|---|---|
| Model | 4054 |
| Category | Calculator |
| Language | English |
Explains the calculator's primary function keys and their operational purposes.
Explains keys for solving right triangles and roof framing calculations like Pitch, Rise, Run, and Rafter Lengths.
Details the Stair Key's functionality for calculating stair dimensions such as riser height and tread width.
Demonstrates conversions between Feet-Inches, Decimal Feet, Yards, Centimeters, and Millimeters.
Shows examples of converting between Square Yards, Square Feet, Cubic Yards, and Cubic Feet.
Calculates the cubic yards of concrete needed for multiple columns with given dimensions.
Demonstrates how to square a foundation using diagonal measurements.
Explains how to convert roof angles to grade, pitch ratio, and pitch in inches.
Shows how to find pitch in inches, degrees, and percent grade from a given pitch ratio.
Calculates the point-to-point length of a common rafter for a pitched roof.
Guides on calculating lengths for common, hip/valley, and jack rafters on regular pitched roofs.
Explains how to find rafter lengths for irregular pitched roofs and jack rafters.
Details how to find stud sizes for a rake-wall based on rise, run, and spacing.
Calculates stair values like riser height, tread width, and stringer length given rise and run.
Finds stair values using floor-to-floor rise and a desired riser height different from the default.
To Next Page