P
OCKET REFERENCE GUIDE — 40
Accuracy/Errors
Accuracy/Display Capacity —
You may enter or calculate values up to
19,999,999.99. Each calculation is carried
out internally to twelve digits.
Errors — When an incorrect entry is
made, or the answer is beyond the range
of the calculator, it will display the word
“ERROR.” To clear an error condition you
must hit the o button once. At this point
you must determine what caused the error
and re-key the problem.
Error Codes:
DISPLAY ERROR TYPE
SBRPASA Overflow (too large to
display)
DIV Error Divide by 0
DIM Error Dimension error
INGR Error Entry error
NADA Attempt to calculate stairs
without entering Rise and
Run
Auto-Range — If an “overflow” is created
because of an input and calculation with
small units that are out of the standard
range of the display, the answer will be
automatically expressed in the next larger
units (instead of showing “SBRPASA”) —
e.g., 20,000,000 mm is shown as 20,000 M.
Also applies to Inches, Feet and Yards.
To Next Page
Loading...
Need help?
General
