Need help?Do you have a question about the Calculated Industries 4080 v3.1 Construction Master Pro Trig and is the answer not in the manual?
General| Model | 4080 v3.1 |
|---|---|
| Category | Calculator |
| Display Type | LCD |
| Power Source | Battery |
| Weight | 4.8 ounces |
| Functions | Trigonometry, Dimensional math |
| Display | LCD |
| Accuracy | 12-digit accuracy |
Explains basic operation, unit keys, memory, and recall functions.
Details how to input linear, square, and cubic measurements.
Describes how to adjust fractional display settings via the preference menu.
Covers converting between various linear, area, and volume units.
Covers adding, subtracting, multiplying, dividing, and percentage calculations.
Details on cumulative memory (M+) and storage registers (M1-M3).
Practical examples for adding and cutting linear measurements.
How to calculate square and rectangular areas.
How to calculate volume for containers, cylinders, and cones.
Calculating the number of blocks or bricks required for projects.
Calculating circle circumference, area, diameter, and radius.
Calculating arc length, angle, chord length, and segment rise.
Calculating concrete volume for driveways, columns, and footings.
Definitions of terms like rise, run, and pitch for roof framing.
How to enter and convert roof pitch values between formats.
Definitions of terms like rise, run, riser, and tread for stair construction.
Calculating stair values based on rise, run, or both.
How to convert between decimal degrees and DMS formats.
Using sine, cosine, tangent, and their inverses for triangle solutions.
Information on display capacity, error codes, and auto-range features.
Details on battery types, replacement, and resetting the calculator.
To Next Page