Calculated Industries 4080 v3.1 Construction Master Pro Trig User Manual

U SER ’ S G UIDE — 49
(Cont’d)
KEYSTROKE DISPLAY
4. Find total area and clear Memory:
® ® M+ 616.5 SQ FEET
5. Find total Cubic Yards:
x 4 i 1 / 2 = 8.5625 CU YD
6. Find total cost:
x 4 5 Ç 0 (Cost) $385.
31
Polygon, Finding Angles Based on Entered Radius and
Number of Sides
You’re going to pour a polygon-shaped patio. Find the polygon values
if the radius is 15 Feet and the number of sides is 6.
KEYSTROKE DISPLAY
1. Enter radius and number of sides* to calculate the full angle:
o o 0.
1 5 f Ç a (Radius) RAD 15 FEET 0 INCH
6 Ç R (Polygon) FULL 120.00°
2. Then calculate the bi-sect angle, side length, perimeter, and
polygon area:
R HALF 60.00°
R SIDE 15 FEET 0 INCH
R PER 90 FEET 0 INCH
R AREA 584.5671 SQ FEET
*You must enter more than three sides for a multi-sided polygon figure or the calcula-
tor will display “None”.

Calculated Industries 4080 v3.1 Construction Master Pro Trig Specifications

General

Brand	Calculated Industries
Model	4080 v3.1 Construction Master Pro Trig
Category	Calculator
Language	English