Calculated Industries 4080 v3.1 Construction Master Pro Trig User Manual

4 — C ONSTRUCTION M ASTER
®
P RO / T RIG / D ESKTOP
m Meters — Enters or converts to Meters .
Ç 7 Centimeters (cm) — Enters or converts to
Centimeters .
Ç 9 Millimeters (mm) — Enters or converts to
Millimeters .
Ç 2 Acres (Acre) — Enters or converts (a square value)
to Acres .
Ç 8 Board Feet (Bd Ft) — Enters or converts cubic
values to Board Feet . One Board Foot is equal to
144 Cubic Inches.
Area and Volume Keys (NOT AVAILABLE ON TRIG MODEL #4080)
l Length — Enters a length for calculation of area or
volume.
W Width — A multi-function key used to enter a width
for calculation of area or volume (if a length and
height are also entered). Consecutive presses of
this key display or calculate:
Press Result
1 Displays Entered Width (WDTH)
2 Area (AREA)
3 Square-up (SQUP)
4 Perimeter (PER)
5 Redisplays Entered Length (LNTH)
6 Redisplays Entered Width (WDTH)
h Height — A multi-function key used to enter a
height for calculation of volume (if a length and width
are also entered). Consecutive presses of this key
display or calculate:
Press Result
1 Displays Entered Height (HGHT)
2 Volume (VOL)
3 Wall Area (WALL)
4 Total Room Area (ROOM)
5 Redisplays Entered Length (LNTH)
6 Redisplays Entered Width (WDTH)

Calculated Industries 4080 v3.1 Construction Master Pro Trig Specifications

General

Brand	Calculated Industries
Model	4080 v3.1 Construction Master Pro Trig
Category	Calculator
Language	English