To Next PageTo Next Page
Need help?Do you have a question about the Calculated Industries Measure Master Pro 4020 and is the answer not in the manual?
General| Brand | Calculated Industries |
|---|---|
| Model | Measure Master Pro 4020 |
| Category | Calculator |
| Language | English |
Lists and defines keys for entering dimensions like feet, inches, and meters.
Allows selection of fractional display formats like 1/16, 1/32, 1/64, etc.
Illustrates how to calculate the area and volume of rectangular shapes using length, width, and height.
Explains how the height key calculates volume, area, square-up, perimeter, wall area, and total room area.
Explains how to convert concrete volume to weight in various units and store custom weight/volume ratios.
Uses memory to calculate total area for carpet, including waste allowance, and converts to square yards.
Shows how to calculate total board feet for multiple lumber pieces and determine the total cost based on price per Mbm.
Demonstrates calculating the area and circumference of a circle given its diameter.
Explains how to find the angle of an arc given the circle's diameter and the arc's length.
Calculates cubic yards of concrete for a driveway and its total cost based on price per yard.
Demonstrates calculating the square-up measurement for a foundation using run and rise.
Explains how to change the calculator's fractional display resolution (e.g., from 1/16 to 1/64).
Explains the one-year warranty, what it covers, exclusions, and requirements for obtaining service.
