Need help?Do you have a question about the Calculated Industries 44080 Construction Master Pro Desktop v3.0 and is the answer not in the manual?
General| Model | 44080 |
|---|---|
| Name | Construction Master Pro Desktop v3.0 |
| Brand | Calculated Industries |
| Display Type | LCD |
| Power Source | Battery |
| Dedicated Keys | Yes |
| Trigonometric Functions | Yes |
| Right Angle Functions | Yes |
| Stair Layout | Yes |
| Rafter Calculations | Yes |
| Hip/Valley | Yes |
| Compound Miter | Yes |
| D:M:S to Decimal | Yes |
| Decimal to D:M:S | Yes |
| User Definable Preferences | Yes |
| Type | Desktop |
| Functions | Construction math functions |
Explains calculator keys and functions.
Guides on entering linear and square/cubic measurements.
Explains setting fractional resolution via preference mode.
Covers linear, square, and cubic unit conversions.
Explains basic arithmetic operations and percentage calculations.
Details cumulative memory (M+) and storage registers (M1-M3).
Calculates area of squares and rectangles.
Uses W key for area, square-up, and perimeter calculations.
Calculates volume of rectangular containers.
Explains calculations for pitch, percent grade, and pitch ratio.
Calculates common rafter lengths.
Calculates hip/valley and jack rafter lengths and angles.
Calculates roof area, squares, bundles, and sheets.
Calculates stair values based on rise, run, or riser limits.
Covers conversions and angle calculations using trig functions.
To Next Page