Need help?Do you have a question about the Calculated Industries Construction Master 5 and is the answer not in the manual?
General| Model | Construction Master 5 |
|---|---|
| Category | Calculator |
| Display | LCD |
| Type | Construction Calculator |
| Power Source | Battery (LR44) |
| Functions | Area, Volume, and more |
Lists calculator's main capabilities for quick problem-solving.
Explains the calculator's keys and their basic functions.
Details keys for dimensions, memory recall, and storage.
Covers keys for weight conversions, circles, arcs, and right triangle/roof framing.
Details keys for Rise, Run, Diagonal, and Hip/Valley calculations.
Explains keys for irregular rafters and rake-wall calculations.
Details how to use the Stair key and its default values.
Covers setting stair parameters and general utility functions.
Explains functions like x², Square Root, Total Cost, and Weight per Volume.
Outlines how to adjust fractional resolution and display formats.
Explains how to input linear, square, and cubic measurements.
Provides examples for converting between feet, inches, yards, and meters.
Shows conversions and explains basic arithmetic operations.
Demonstrates adding, subtracting, and multiplying measurement strings.
Shows how to divide dimensions and perform percentage calculations.
Demonstrates calculating square and rectangular areas and volumes.
Explains adding waste allowances and converting weights.
Shows how to calculate board feet and cost.
Demonstrates calculating the number of studs for a wall.
Shows how to find circle area and circumference using diameter.
Explains finding arc angle given diameter and arc length.
Calculates concrete volume for driveways and columns.
Shows how to square a foundation using diagonal measurements.
Explains converting roof angles to grade, pitch ratio, and pitch in inches.
Illustrates converting slope ratios and calculating common rafter length.
Explains how to set and change fractional display resolution.
Lists default and preference settings for the calculator.
Discusses calculator precision, error messages, and troubleshooting.
Provides instructions for battery replacement and calculator reset.
Lists common geometric area formulas.
Lists common geometric volume formulas.
Details warranty coverage and service procedures.
To Next Page
