U
SER
’
S
G
UIDE
— 35
BLOCKS/BRICKS (NOT AVAILABLE ON TRIG MODEL #4080)
Number of Blocks, Based on Entered Length and Height
You are building an “L” shaped retaining wall out of standard 8-inch x
16-inch size blocks
(Note: this is the default block size of 128 Square
Inches)
. One side of the retaining wall is 22 Feet long, and the other
side is 15 Feet 8 Inches long. The wall is to be 4 Feet high. How many
blocks are required to build this wall? Add a 5% waste allowance.
Note: The calculated area from an entered length
(l)
and height
(h)
will be
used for calculating blocks if these values exist.
KEYSTROKE DISPLAY
1. Find total wall length:
o o 0.
® Ç 4*
(Blk Size)
B--AR 128. SQ INCH
2 2 f + 1 5 f 8 i = 37 FEET 8 INCH
l LNTH 37 FEET 8 INCH
2. Enter wall height as height:
4 f h HGHT 4 FEET 0 INCH
3. Find the number of blocks and add 5% waste allowance:
Ç l
(Blocks)
BLKS 169.5
+ 5 % 177.975
(178 Blocks)
*If ® Ç l
(Blocks)
does not result in 128 Square Inches,
then enter the following:
1 2 8 i i ß 4
(Blk Size)
B--AR 128. SQ INCH
-OR-
8 i x 1 6 i = 128. SQ INCH
ß 4
(Blk Size)
B--AR 128. SQ INCH
Number of Blocks, Based on Entered Area
Find the number of blocks required for an area measuring 300
Square Feet. Then add a 3% waste allowance.
KEYSTROKE DISPLAY
o o 0.
3 0 0 f f 300 SQ FEET
Ç l
(Blocks)
BLKS 337.5
+ 3 % 347.625
(348 Blocks)
STORED
STORED
STORED
To Next Page
Loading...
Need help?
General
