Need help?Do you have a question about the Caldera Paradise Series and is the answer not in the manual?
General| Electrical | 240V |
|---|---|
| Heater Output | 4.0 kW |
| Pump | 1-2 |
| Lighting | LED |
| Water Care System | Ozone |
| Shell Material | Acrylic |
| Amperage | 50A |
| Warranty | 5 years |
Instructions for choosing a smooth, level, self-draining surface for spa placement.
Requirements for constructing a wood deck to support spa weight.
Details on hard-wiring the spa to a 50 amp dedicated circuit with GFCI protection.
Steps to prepare the spa for filling, including checking unions and valves.
Instructions on how to fill the spa with water, avoiding softened water.
Overview of the spa's control panel, LCD, and touch pad functions.
Routine maintenance tasks scheduled by frequency (daily, weekly, monthly).
Steps to prepare the spa for winter or extended non-use, including draining and air jet clearing.
Procedure for completely draining the spa, including plumbing and filter removal.
Procedure to correct a pump not flowing water after filling or refilling the spa.
To Next Page
