To Next PageTo Next Page
Need help?Do you have a question about the Caldera Vacanza Series and is the answer not in the manual?
General| Electrical Requirements | 50A |
|---|---|
| Heater | 4kW |
| Shell Material | Acrylic |
| Warranty | 5 years on shell, 3 years on parts |
| Dimensions | 84 in x 84 in x 34 in (213 cm x 213 cm x 86 cm) |
Local permits may be required for electrical circuits or exterior construction like decks or gazebos. Barrier codes may also apply.
Special requirements for indoor installation include flooring, drainage, humidity control, and ventilation.
Ensure deck load capacity is sufficient. Consult an engineer for elevated decks or indoor installations.
A solid foundation is crucial for outdoor and patio installations to prevent structural damage.
Notes on concrete slope, stepping stones, soft surfaces, and debris management for spa foundations.
Determine required clearance by measuring spa dimensions, delivery cart, and potential turns.
A crane may be needed for difficult access; it is operated by a licensed professional.
Provides width, length, and height for various spa models for clearance planning.
Visual guide and checklist for assessing path clearance, overhead obstructions, and turns.
Detailed front view dimensions for the Palatino model, including doors, vents, and cutouts.
Top-down view dimensions for the Palatino, showing overall length and width.
Recommends a minimum 4" concrete pad or sound deck and prohibits shimming the Palatino.
Front view dimensions for Marino and Vanto models, including door and cutout placements.
Top-down view dimensions for Marino and Vanto, showing overall length and width.
Recommends a minimum 4" concrete pad or sound deck and prohibits shimming the Marino & Vanto.
Front view dimensions for the Tarino model, including door and electrical cutout details.
Top-down view dimensions for the Tarino, showing overall length and width.
Recommends a minimum 4" concrete pad or sound deck and prohibits shimming the Tarino.
Front view dimensions for the Aventine model, including door and drain locations.
Bottom view dimensions for the Aventine, showing length, width, and door side.
Recommends a minimum 4" concrete pad or sound deck and prohibits shimming the Aventine.
Explains voltage options and their impact on heater performance.
Details for 115V cord-connected setup, including GFCI placement and testing.
Specifics for 115V dedicated circuits, wiring, GFCI protection, and bonding requirements.
Illustrates the 230V wiring from the main panel to the sub-panel and control box.
Lists critical electrical cautions, including wire types, GFCI use, and avoiding extension cords.
Shows the location of the control box and wiring access points for specific spa models.
Details for 230V installation, subpanel placement, grounding, and warranty implications of GFCI bypass.
Lists optional care products, accessories, and cover systems for Caldera spas.
Compares models on dimensions, capacity, weight, and electrical requirements.
Advises consulting an engineer before placing a spa on an elevated deck.
Clarifies that filled and dead weight include occupant weight (175 lbs average).
