California Air Tools SP-9413 - User Manual

California Air Tools SP-9413

16 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

!

(((!# #%!!$!@>?:80=$@;;:=?



ULTRA QUIET & OIL FREE

AIR COMPRESSOR

MOTOR/PUMP

OwnER'S MAnUAL

Questions and Answers

R
Raymond JohnsonJul 29, 2025
Why has my California Air Tools SP-9413 stopped and won't start?
- J
  jacqueline55Jul 29, 2025
  If your California Air Tools Air Compressor has stopped and won't restart, it could be due to motor overheating. Ensure your main voltage matches the specifications. Long or thin extension cords can cause voltage drops and overheating. Let the motor cool down, use heavy-duty extension cords, and plug the compressor into a socket close to the consumer unit or fuse box. Alternatively, burned-out motor windings could be the cause, in which case you should contact Customer Support.
L
Levi BellAug 5, 2025
Why does the motor on my California Air Tools SP-9413 Air Compressor not start or start slowly?
- J
  James KingAug 5, 2025
  If the motor on your California Air Tools Air Compressor doesn't start or starts slowly, it might be due to a low voltage supply. Check that the main voltage corresponds to specifications. An extension cord that is too thin or too long can cause a voltage drop and cause the motor to overheat. Allow the motor to cool down. Use heavy duty extension cords and ensure that the compressor is plugged into a socket as close as possible to the consumer unit or fuse box.
F
Felicia ConwayAug 13, 2025
What to do if my California Air Tools SP-9413 is noisy with metallic clangs?
- F
  fsandersAug 13, 2025
  If your California Air Tools Air Compressor is making metallic clanging noises, it could be due to a broken compressor head gasket, a faulty valve plate, a worn or broken piston ring, or a worn or broken cylinder ring. In any of these cases, stop the compressor and contact the dealer.
C
Christopher TurnerAug 21, 2025
How to fix a California Air Tools SP-9413 Air Compressor motor that hums but doesn't start?
- R
  Rebecca GomezAug 21, 2025
  If the motor of your California Air Tools Air Compressor doesn't start but makes a humming noise, the capacitor might be burned out. Replace the starter capacitor to resolve this issue.

Summary

Important Safety Instructions

Safety Messages and Signal Words

Kickback Safety Warning

Warns about severe trauma from moving parts and protective measures.

Electrical Shock Safety

Warns about electric shock hazards and necessary precautions.

Respiratory Safety

Advises on protection against dust and contaminants during operation.

Flying Objects Safety

Warns about injury from propelled items and the need for eye protection.

Hot Surfaces and Fire Hazards

Alerts to hot surfaces and fire risks during operation.

Explosion Hazards

Advises caution regarding pressurized air and potential explosions.

Extension Cord Safety

Guidelines for using extension cords safely to prevent damage.

Locations of Important Labels

Air Compressor Components

Pre-Operation Checklist

Package Contents and Assembly

Compressor Location and Air Quality

Operating the Air Compressor

Electrical Power Requirements

Extension Cord Usage

Maintenance

Changing the Air Filter

Cleaning Procedures

Troubleshooting

Common Problems and Solutions

Specifications

California Air Tools SP-9413 Specifications

General

Model	SP-9413
Motor Power	1.0 HP
Max Pressure	125 PSI
Weight	52 lbs
Pump Type	Oil-Free
Type	Ultra Quiet
Noise Level	60 dB
Voltage	110 Volts
Air Delivery @ 40 PSI	5.30 CFM

Related product manuals

Preview: California Air Tools SP-9421

California Air Tools SP-9421

California Air Tools TL5

Preview: California Air Tools 365C

California Air Tools 365C

Preview: California Air Tools 20020

California Air Tools 20020

Preview: California Air Tools 10020C

California Air Tools 10020C

Preview: California Air Tools 5510SE

California Air Tools 5510SE

Preview: California Air Tools 20040DC

California Air Tools 20040DC

Preview: California Air Tools 8010SPC

California Air Tools 8010SPC

Preview: California Air Tools 20040DCAD

California Air Tools 20040DCAD

Preview: California Air Tools 10020ACAD

California Air Tools 10020ACAD

Preview: 15020C-22060

Preview: 10020C-22060