Calix GigaSpire BLAST u6 - GigaSpire Turn-up LED Status

31
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
.
LED States - GigaSpire Turn-up
The LED's located on the corner of the unit provide information on the status and current
state of the device. Below, you will find a detailed status of the power-up cycle.
Unit Status
Power-up
Status
Function LED Status
Off
Power is off.
 The unit has not been turned on or
 There is no power to the unit or
 The UPS battery has been
discharged and there is insufficient
power to continue operation.
Note: LED is off.
8762
Booting Up,
Software Upgrade in
Process
Unit is in the boot-up process or
service/software is being upgraded.
Flashes orange every second assuming
software has taken over.
Note: LED is on.
8759
Boot-up Failure
Boot-up failed (assuming software has
taken over)
Note: Cycles at 8/10 of a second
Note: LED is on.
8761
Connected to
Internet
Unit has successfully booted up, local
services are up, and connected to the
Internet.
Note: LED is on.
8760
Service Failure, No
Internet
No service, no Internet.
Note: LED is on.
Notes: Cycles at 1.6 seconds
8761
Alexa has been
triggered, Alexa is
listening
Alexa is listening and active. Listing
once the trigger word is heard.
Note: LED is on.
Note: Cyan on continuously.
8763