Need help?Do you have a question about the Calix GigaSpire BLAST u12 and is the answer not in the manual?
General| Category | Network Hardware |
|---|---|
| Device Type | Wireless Router |
| Wireless Standards | 802.11a/b/g/n/ac/ax |
| Ethernet Ports | 4 x Gigabit Ethernet |
| MoCA | Yes |
| Product Type | Router |
| Type | Router |
| Wireless Standard | 802.11ax |
| Wi-Fi Technology | 802.11ax |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Ports | 4 x Gigabit Ethernet |
| USB Ports | USB 3.0 |
| Voice Ports | 2 FXS |
| Power Supply | 12V |
Regulatory compliance and agency approvals for GigaSpire devices.
Essential steps and considerations before installing the GigaSpire unit.
Prerequisites and checks before starting the GigaSpire installation process.
Scope and content of the GigaSpire installation document.
Practical advice and best practices for installing the GigaSpire device.
Factors to consider before determining the final installation location and setup.
Contents of the GigaSpire package and initial unpacking steps.
Physical dimensions for mounting the GigaSpire on a tabletop.
Physical dimensions and guidance for wall mounting the GigaSpire device.
How to properly mount the GigaSpire BLAST unit on a tabletop.
Process and considerations for wall mounting the GigaSpire BLAST unit.
Further best practices and options for mounting the GigaSpire system.
Different reset functions available for the GigaSpire BLAST device.
How to power up the GigaSpire BLAST unit without a UPS.
Instructions for mounting and connecting an Uninterruptible Power Supply (UPS).
Establishing internet connection for GigaSpire as gateway or mesh point.
Meaning of LED states during GigaSpire power-up sequence.
LED indicators for Wi-Fi Protected Setup (WPS) operations.
LED states for Alexa and microphone mute functions.
LED behaviors for Alexa voice assistant functions.
LED states for u6.1 and u6.2 models during power-up.
LED indicators for GigaMesh functionality and pairing.
To Next Page
