Calix GigaSpire BLAST u12 - GigaSpire u6.1, u6.2 LED States

36
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
.
LED States - u6.1, u6.2
The LED's located on the corner of the device provides information on the status and
current state of the device. Below, you will find a detailed status of the power-up cycle.
Power Off and Boot-up
Description Colors Indication
OFF
 Power is Off
 The unit has not been turned on
or
 There is no power to the unit
or

Any auxiliary battery has been discharged and can
no longer power the unit.
Off
Booting Up, SW Upgrade in Process
 Unit is in the process of booting up or
services/software is being upgraded

Flashing ever 1 second assuming software can
control the LED
Off &
Orange
Cycles @
1000 msec
 Boot-up Failure

Unit boot-up has failed (assuming software can
control the LED).
Off & Red
Cycles @
800 msec
Unit Status
Power-up Status Function LED Status
Off
Power is off.
The unit has not been turned on
or
There is no power to the unit
or
The UPS battery has been
discharged and there is insufficient
power to continue operation.
Note: The LED is off.
Booting Up or SW Upgrade
in Process
 Unit is in the process of
being boot up or
service/software is being
upgraded

Flashing every 1 second on
cyan color - assuming SW
can control the LEDs.
Off and Orange (1000 msec)
Note: The LED is on.
Boot-up Failure

Unit boot-up failed (if SW
can control the LEDs)
Off and Red (800 msec)
Note: The LED is on.